The diamond-shaped design of the bolt head
of t-bolt for embedded channel system can effectively prevent the bolt from
over-threading. There is a notch on the end of the screw to facilitate correct
installation and positioning. Advanced casting technology, sharp and flexible
products.
T-bolt for embedded channel system has 8.8
mechanical properties, excellent tensile, shear, fatigue and fire resistance.
The surface adopts hot-dip galvanizing process, the thickness of the zinc layer
is above 55um to ensure smooth tightening of nuts and bolts, and special
multi-alloy co-permeation coating technology is adopted to effectively avoid a
series of contradictions when the coating is thickened.
The t-bolt for embedded channel system has
a closed toothed T-bolt head and a toothed embedded groove to ensure that the
longitudinal load transmission of the channel is realized through the locking
force of the tooth, and the risk of slipping is minimized.
64/44 Tooth T-bolt 1. Features and advantages 1. The diamond-shaped design of the bolt head can effectively prevent the bolt from being over-threaded 2. There is a notch mark on the end of the screw to facilitate correct installation and positioning 3. Intermediate frequency heating, cold heading combined with red beater, stable performance and beautiful appearance 4.8.8 level mechanical performance, dovetail multi-tooth design, excellent tensile, shear, fatigue, and fire resistance 5. The surface adopts hot-dip galvanizing process, the thickness of the zinc layer is 55um, to ensure the smooth screwing of the nut and bolt
Read MoreSend Inquiry53/34 Dovetail T-bolt With Teeth 1. Features and advantages 2. The diamond-shaped design of the bolt head can effectively prevent the bolt from being over-threaded 3. There is a notch mark on the end of the screw to facilitate correct installation and positioning 4. Intermediate frequency heating, cold heading combined with red beater, stable performance and beautiful appearance 5.8.8 level mechanical performance, dovetail and multi-tooth design, excellent tensile, shear, fatigue, and fire resistance 6. The surface adopts hot-dip galvanizing process, the thickness of the zinc layer is 55um, to ensure the smooth screwing of the nut and bolt
Read MoreSend InquiryThe 38/23 Tooth T-bolt design bolt head can effectively prevent the bolt from being over-threaded, There is a notch mark on the end of the screw to facilitate correct installation and positioning. The 38/23 Tooth T-bolt surface adopts hot-dip galvanizing process, the thickness of the zinc layer is 55um, to ensure the smooth screwing of the nut and bolt.
Read MoreSend InquiryThe 30/20 Tooth T-bolt surface adopts special multi-alloy co-permeation coating technology, which effectively avoids the contradiction between coating and anti-off when the coating thickness is 80um, and meets the 150-hour copper accelerated test, the neutral 1200-hour salt spray test and higher requirements.
Read MoreSend Inquiry