Products
Heavy Support Arm Support System Manufacturers
Heavy support arm support system is
suitable for installation on the concrete roof, wall, floor, and other surfaces
to adapt to a variety of different working conditions. The upper surface of the
product has the opening treatment, the opening position is precise, easy to
install and adjust. Products are fixed by anchor bolts, safe and reliable, low
failure rate, in different scenarios have excellent performance.
Heavy support arm support system is made of
high-quality carbon steel which is strong and durable. The surface of the
product is treated with an electroplated metal coating, the thickness of which
is 55 microns. The corrosion resistance is excellent, and the physical and
chemical properties of the product body will not be greatly changed.
The angle of heavy support arm support system
can be adjusted freely angle, which is convenient for installation under
different actual conditions and easy to support.
- View as
-
-
Steel Structure Support Arm System
Steel Structure Support Arm System 1. Features and advantages 1. Suitable for the installation of steel structure beams, without drilling and welding 2. 4 long strip holes design, easy to install and adjust 3. Applicable to I-beams with flange width ranging from 75-300mm 4. 2 through bolts must be installed crosswise 5. Material carbon steel surface hot-dip galvanizing treatment (zinc layer thickness 55um)
Read MoreSend Inquiry
Channel Steel Column Support Arm System
Channel Steel Column Support Arm System Features and advantages 1. Suitable for installing horizontal support arm on channel steel column 2. The adjustable space of the elongated hole is 50mm, which greatly improves installation flexibility 3. Stamping card position design, resist torsion moment 4. Tooth design improves anti-slip, shear resistance and impact resistance 5. 2 through bolts must be installed crosswise 6. Surface hot-dip galvanizing (zinc layer thickness 55um) 7. Material carbon steel stainless steel
Read MoreSend Inquiry
Concrete Support Arm System
Concrete Support Arm System 1. Features and advantages 1. Suitable for installation on concrete roofs, walls and floors 2. 4 long strip holes are designed to facilitate installation and adjustment 3. Use anchor bolts to fix, safe and reliable 4. Can be used as a support arm base 5. Depending on the requirements of the working conditions, the single base cantilever arm can be used 6. 2 through bolts must be installed crosswise 7. Surface hot-dip galvanizing (zinc layer thickness 55um) 8. Material carbon steel stainless steel
Read MoreSend Inquiry
Steel Structure Base WH-S90/4
Steel Structure Base WH-S90/4 1. Features and advantages 1.Suitable for the installation of steel structure beams, without drilling and welding 2. 4 long strip holes design, easy to install and adjust 3. Designed to improve anti-slip, shear and impact resistance 4. Can be used as a support arm base 5. Depending on the requirements of the working conditions, the single base cantilever arm can be used 6. Applicable to I-beams with flange width ranging from 75-300mm 7. 2 through bolts must be installed crosswise 8. Material carbon steel surface hot-dip galvanizing (zinc layer thickness 55um)
Read MoreSend Inquiry
Steel Structure Hinged Base WH-S/4
Steel Structure Hinged Base WH-S/4 1. Features and advantages 1. Suitable for the installation of steel structure beams, without drilling and welding 2. Applicable to I-beams with flange width ranging from 75-300mm 3.The angle can be adjusted arbitrarily within 3.0-180° for support 4. Material Carbon steel surface hot-dip galvanizing (zinc layer thickness 55um)
Read MoreSend Inquiry
Steel Structure Diagonal Support Arm System
Steel Structure Diagonal Support Arm System 1. Features and advantages 1. Suitable for the installation of steel structure beams, without drilling and welding 2. 4 long strip holes design, easy to install and adjust 3. Tooth design improves anti-slip, shear resistance and impact resistance 4. Applicable to I-beams with flange width ranging from 75-300mm 5. 2 through bolts must be installed crosswise 6. Material carbon steel surface hot-dip galvanizing treatment (zinc layer thickness 55um)
Read MoreSend Inquiry
