Heavy support arm support system is
suitable for installation on the concrete roof, wall, floor, and other surfaces
to adapt to a variety of different working conditions. The upper surface of the
product has the opening treatment, the opening position is precise, easy to
install and adjust. Products are fixed by anchor bolts, safe and reliable, low
failure rate, in different scenarios have excellent performance.
Heavy support arm support system is made of
high-quality carbon steel which is strong and durable. The surface of the
product is treated with an electroplated metal coating, the thickness of which
is 55 microns. The corrosion resistance is excellent, and the physical and
chemical properties of the product body will not be greatly changed.
The angle of heavy support arm support system
can be adjusted freely angle, which is convenient for installation under
different actual conditions and easy to support.
Heavy Duty Double Hole Right Angle Connector WH-S90-L 1. Features and advantages 1. Suitable for installing horizontal support arm on channel steel column 2. The adjustable space of the elongated hole is 50mm, which greatly improves installation flexibility 3. Stamping card position design, resist torsion moment 4. Tooth design improves anti-slip, shear resistance and impact resistance 5. It can be used as a stand alone 6. 2 through bolts must be installed crosswise 7. Surface hot-dip galvanizing (zinc layer thickness 55um) 8. Material carbon steel stainless steel
Read MoreSend InquiryChannel Steel Column Diagonal Support Arm System 1. Features and advantages 1. Suitable for installing horizontal support arm on channel steel column 2. The adjustable space of the elongated hole is 50mm, which greatly improves installation flexibility 3. Stamping card position design, resist torsion moment 4. Tooth design improves anti-slip, shear resistance and impact resistance 5. Two through bolts must be installed crosswise 6. Surface hot-dip galvanizing (zinc layer thickness 55um) 7. Material carbon steel stainless steel
Read MoreSend InquiryInclined Hinge Connecting Piece WH-U-A Features and advantages 1. Suitable for use with hinged base 2. The angle can be adjusted arbitrarily within 2.0-180° for support 3. The adjustable space of the long strip hole is 50mm, which improves installation flexibility 4. Tooth design improves anti-slip, shear resistance and impact resistance 5. Must be used in pairs 6. Surface hot-dip galvanizing (zinc layer thickness 55um) 7. Material carbon steel stainless steel
Read MoreSend InquiryConcrete base WH-C90/4 suitable for installation on concrete roofs, walls and floors, 4 long strip holes are designed to facilitate installation and adjustment. Concrete base WH-C90/4 depending on the requirements of the working conditions, the single base cantilever arm can be used.
Read MoreSend Inquiry